It’s a severe headache when you try to access the internet via Amped extender but can’t do so. Because your Amped wireless extender not connecting to your host router. There are heaps of reasons behind this situation when your extender failed to connect to your router. So, to fix this, here we have mentioned some basic Amped wireless troubleshooting methods to make your task easier. Just have a quick view at the bottom section to instantly fix the issue.
Restart your Amped Extender
This is the first thing you should consider before implementing any other troubleshooting method. By restarting your Extender, you will fix minor technical glitches and also provide some rest to your extender, preventing it from getting over-heated. By doing so, you are among the 80% of users who get their issues fixed. So, here we have disclosed step-by-step information to perform a restart of your Amped Wireless extender for your betterment.
- First, you need to remove all the connected devices from your extender.
- Then, unplug your extender from the power socket and turn it off.
- Set it aside for a while before connecting it back to the power socket and power it on.
Now, see if the issue continues to arise. Then, implement the next troubleshoot methods.
Inspect your Ethernet Connection
Examine the condition of the Ethernet cable as it needs to be free from any kind of damage for proper functioning. So, if you detect any cuts in the Ethernet cable, then replace or swap it right away. Else, you’ll keep experiencing the Amped extender not connecting to the router. Once you’ve swapped the Ethernet cable, now check if you can establish a connection between your Amped extender and router, then it’s well and good. If that’s not the case, then try connecting them using a wireless connection. Just bear in mind to place your Amped extender close to your home router. For the best experience with your Amped extender, while accessing Amped wireless extender setup wizard, an Ethernet cable is the best option to consider to avoid any connectivity issues.
Select an Ideal Location for Your Extender
You need to be very cautious while positioning your Amped wireless extender. Make sure that your extender is placed within the range of your host router to avoid any connectivity issues. So, here we have given some important aspects that you should keep in mind while placing your Amped wireless extender.
- Position it away from the objects such as refrigerators, microwaves, cordless phones, and other smart home appliances that use radio frequency to avoid any interference in your WiFi signals.
- Avoid placing it close to the reflexive surfaces or corners of the house.
Reset Your Extender
If you have performed all the aforementioned troubleshooting solutions, and still your Amped wireless extender not connecting to your host router, then is the final resort you should implement to fix the issue. Sometimes incomplete or improper Amped setup can also be the reason behind the outcome of this specific issue. However, resetting your Amped extender to the default factory settings and configuring it again from the start is not a tough job but still many users, especially without any technical knowledge, find it a bit confusing to reset your Amped extender. If you are also the one with limited technical knowledge, then follow the steps listed below to avoid any issues.
- You need to look for the Reset button on your Amped wireless extender.
- Once you have found the Reset button, push it.
- Then, your Amped wireless extender will reboot on its own and will be restored to the default factory settings.
Well done, your Amped wireless extender is restored to the default factory settings. Now, re-configure it again using the default web address i.e. setup.ampedwireless.com and check the result.
Hopefully, this whole piece of information brings up the success in resolving Amped wireless extender not connecting to the router issue. We hope, you have liked the post, and if you want to add some more points to it, then feel free to share your suggestion in a comment section.